User's Manual Part 5

5.4 8065751025
Constellation
®
Vision System
LAST PAGE OF THIS SECTION
Figure 5-5 TROUBLESHOOTING GUIDE - When a problem is encountered, refer to this chart first.
No message is displayed, but
unable to setup and operate as
described in this operator's manual
and other applicable labeling.
Problem
Encountered
Follow the Problem Conditions table
in this section of the operator’s man-
ual. If unable to fix the problem, or
if the problem is not described in
the troubleshooting table, contact
Alcon Technical Support or your
local Alcon representative.
Unit displays an Advisory number
and message. These messages
are displayed within a dialog box
and have a green border.
Follow the Advisories troubleshoot-
ing table in this section of the oper-
ator’s manual. If unable to fix the
problem, write down the Advisory
number and message exactly as it
appears on the screen, then con-
tact Alcon Technical Support or
your local Alcon representative.
Write down the Warning number and
message exactly as it appears on the
screen, then contact Alcon Technical
Support or your local Alcon repre-
sentative. Some or all of the functions
could be disabled. Do not use unit
unless the case is already started
and no back-up is available.
Unit displays a System Fault
number and message. These
messages are displayed within a
dialog box and have a red border.
Write down the Fault number and
message exactly as it appears on the
screen, then contact Alcon Technical
Support or your local Alcon repre-
sentative. Discontinue use of unit
until the problem is resolved.
Unit displays a Warning number
and message. These messages
are displayed within a dialog box
and have a yellow border.