User's Manual Part 5

3.2 8065751025
Constellation
®
Vision System
Instrument Tray Horizontal/Vertical Latch Release
Pulling this latch release in the direction shown allows the user
to rotate the tray to the horizontal or vertical (stored) position.
Each position locks in place when the latch is released.
Instrument Tray Postion Latch Release
Pulling this latch release allows the tray to be
moved vertically (up and down), and to rotate at
the three points shown in this illustration. These
three pivot points allow the tray to be placed in
virtually any position necessary to accomodate
most surgery setups. Releasing the latch locks
the tray in the current position.
POSTIONING THE INSTRUMENT TRAY
The tray is capable of accommodating a variety of positions in the operating room
environment: right, left, front and rear of the surgeon as well as the front of the bed. The tray
height and position are adjustable by pulling the Instrument Tray Latch Release shown in
Figure 3-1.
WARNING!
The maximum allowable load on the instrument tray is 20 lb (9 kg). If the load
exceeds this limit, the tray arm will automatically lower itself in order to avoid
tipping the system over. Additionally, if the instrument tray is positioned over a
patient, a mayo stand should be placed beneath it to avoid a potential collapse
of the tray arm onto the patient.
Figure 3-1 Positioning the Instrument Tray