Operation Manual

8
person on the Base will take the person off of hold and
the call will automatically be transferred to the handset
unit.
HANDSET UNIT
3. Handset will ring, press any key to talking.
4. Press to deactivate the INT and then press
again to get the outside call.
5. You will now be able to answer the call that is on hold.
HANDSET AUTODIALING FUNCTIONS
Make sure the handset POWER switch is ON.
The handset auto-dial memory can store up to 12 telephone numbers. Stored numbers can
each have a maximum of 15 digits.
TO STORE A NUMBER
1. In the standby mode press “MEMO”.
2. Input the telephone number you want to store.
3. Press MEMO again.
4. Press an index number you wish to assign that
telephone number to ( 0~9, #, * ).
e.g. MEMO + 2614980 + MEMO + 1 this means the
telephone number 2614980 is stored in the index number
“1”.
NOTE
If you input a wrong digit when storing a phone number, press and follow the above 4
steps again.
TO RETRIEVE AND CALL A NUMBER STORED IN THE MEMORY
1. Press to get a dial tone.
2. Press “MEMO”.
3. Press the desired index number ( 0~9, #, * ).
The number will be dialed out automatically.
2
1
2
1
3