User`s guide

Page 18 March 20, 2013 • Alcorn McBride RideTraXX User’s Manual • Rev 1.3
Transferring Files via FTP
In addition to transferring the files to the RideTraXX‟s compact flash card
directly with your PC, RideTraXX has a built-in FTP server allowing for
quick file transfers over Ethernet.
The nameserver setting
is used to resolve
hostnames into IP
addresses. If you will
not be using domain
names (for NTP server
addresses, etc.) you
need not change this
value from the default.
Before using FTP, be sure that the network settings on your RideTraXX are
configured correctly. The default network settings are listed below.
IP Address
192.168.0.254
Subnet Mask
255.255.255.0
Gateway
192.168.0.1
Nameserver (DNS)
127.0.0.1
FTP User
admin
FTP Password
password