User`s guide

Page 10 January 8, 2014 • Alcorn McBride 8TraXX/E User’s Manual • Rev 2.7
Playing a Test Sound
Every 8TraXX/E comes with a Compact Flash card preloaded with test sounds
already installed in the unit’s Compact Flash slot. To play test sounds, follow these
step-by-step directions:
• Connect a channel of the 8TraXX/E to a set of powered speakers or
to the input to an amplifier.
• Power the 8TraXX/E using the included power supply. The LCD
display will indicate that the 8TraXX/E is initializing, and then
display its current status when it’s finished.
• When the 8TraXX/E has finished initializing, press the front panel
channel pushbutton corresponding to the channel you connected
the amplifier to. You should hear the test sound playing.
Connect to amplifier or
powered speakers