User`s guide

Resume Code Feature

For applications where you would like your lighting console (or lighting programmer) to

resume the lighting without being in front of the DMX OverRide, you can use the

Resume Code feature. To do so, the first step is to verify that DIP switch number 6 is

OFF.

If the DMX OverRide is in an override mode, the console can return the unit to Resume

mode by setting channel number 512 to the following values (in order):

0% ⇒ 75% ⇒ 25% ⇒ 100%, followed by any value other than 100%

This unique pattern will allow you to resume DMX feedthrough from your console

without interfering with the normal operation of your lighting.