User`s guide

iii
Every effort has been made to assure the accuracy of the information contained in this manual,
and the reliability of the Alcorn McBride DMX OverRide™ hardware and software. Errors can
sometimes go undetected, however. If you find one, please bring it to our attention so that we can
correct it for others. Alcorn McBride welcomes comments and suggestions on the content and
layout of its documentation.
Applications described herein are for illustrative purposes only. Alcorn McBride Inc. assumes no
responsibility or liability for the use of these products, and makes no representation or warranty
that the use of these products for specific applications will be suitable without further testing or
modification. Alcorn McBride products are not intended for use in applications where a
malfunction can reasonably be expected to result in personal injury. Customers using or selling
Alcorn McBride products for use in such applications do so at their own risk, and agree to fully
indemnify Alcorn McBride for any damages resulting from such improper use or sale.
This publication was created using Microsoft Word 2000 for Windows XP, Version 9.0.4119 SR-1.
Camera-ready art and illustrations were produced using Corel DRAW!, Version 8.0
DMX OverRide™ is a trademark of Alcorn McBride Inc., all rights reserved.
Copyright  2009 Alcorn McBride, Inc. All rights reserved.
Hardware Design: Jim Carstensen
Firmware Design: Jim Carstensen
Documentation: John Conley, Jim Carstensen
Mechanical Design: Martin Chaney
Document Number 110-103486.50
Alcorn McBride Inc.
3300 S. Hiawassee, Suite 105
Orlando, Florida 32835
[phone]
FAX: [phone]
Internet: http://www.alcorn.com
e-mail: [e-mail]