User`s manual

Alcorn McBride Digital Video Machine HD User’s Manual Rev 1.0
33
GPS Device Setup
GPS Builder typically detects when a GPS receiver is connected to your PC.
However, if this is not the case, click on the ‘GPS Setup’ button located at the top of
the screen. This screen allows you to specify the COM port and baud rate of the GPS
device.
Connecting a GPS Sensor to a PC
In order for GPS Builder to detect latitude and longitude, a GPS sensor must be
connected to your computer. This is typically done using a USBÆGPS adapter. GPS
sensors and supporting USB adapters are commonly available from a variety of
companies and distributors. However, for your convenience Alcorn McBride stocks
and sells GPS accessories that have been verified to be compatible with GPS Builder
and the DVMHD. Be sure to contact Alcorn McBride to get the latest information and
availability for these accessories.