Specifications

Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010 Page 35
status is either: "Awaiting SMPTE", "Running", "Paused", "Idle"
or "Error"
Example: Running 01:00:20.30 <CR>
DMX File Query
Description: This command causes the Light Cue Pro to respond with the dmx
files currently playing. The word "none" is returned if no cues are
playing.
Command bytes: UuCC<CR>
u – the Universe number.
Message Response: "ccccccc.ccc" , "ccccccc.ccc" <CR>
where "ccccccc.ccc" is the ASCII representation of the file
currently playing on that Universe separated by commas
Example: "dmx00001.dmc","dmx00002.dmc" <CR> Cue numbers
1, & 2 are playing
None<CR> no cues are playing (unit is idle)
Reset
Description: This command causes the LightCue Pro to stop the playback of all
active cues and hold the current look.
Command bytes: UuRJ<CR
u – the Universe number. Use * for all.
Message Response: R<CR>
Pile-On Priority
Description: When set to 1, the LightCue Pro is in "Last Takes Priority" mode.
Regardless of whether the DMX Value is higher or not, the last
piled on value for that channel will be applied.
Command bytes: nPP<CR
n = 1 – Last Takes Priority
n = 0 – Highest Takes Priority
Message Response: R<CR>
Longitude
Description: This command will get or set the longitude coordinates.