User guide

System Settings Page 9
System Settings
To connect ShowTouch to your control network, it is most likely that you will need to change one
or more of the settings. System settings include the network addresses for all Ethernet ports and
the administrator password used primarily for the FTP server. It is also possible to shutdown the
ShowTouch hardware so that the power can be safely disconnected.
Touch “System” from the Control Panel to display these settings.
Changing the Network Settings
1. Select the network connection you wish to change.
2. Adjust the network settings manually or select “Use DHCP” if you are connected to a
network with a DHCP server.
3. Touch “Apply” when done so that the changes can be saved.
Changing the Admin Password
1. Touch “Change Admin Password” to display the password entry fields.