User guide

Interface Design Page 28
Item Types
Type
Appearance
Actions
Buttons have a pushed and a not-pushed state.
Each state can have its own image, text
position, and text color. The button action
occurs only after the button has been clicked
and released
 Start Sequence
 Change Page
 Set Variable
 Toggle Output
Valid image formats include jpg, png, bmp,
and gif. Images can have an action that will
change the image displayed when the value of
a variable changes
 Variable
Indicators are not interactive. They are used
for display only. Each action of an indicator
is used to determine when the indicator is on
or off. Use a Toggle instead of an indicator to
allow the user to interact with a variable or
output.
 Boolean Variable
 Output
 Input
The slider item consists of a base and a slide.
The base remains still while the slide can
move freely along the base. The slider is used
to display and change values. Options include
min value, max value, desired number of steps
within the value range, and whether the slider
will continuously change the value while in
motion or wait till the slide is released before
updating the value.
 Integer Variable
Text can be used just to present information
on the page or can be linked to variable data
from the show controller. Text actions only
indicate which variable to display and will not
change the value of the variable.
 Any Variable