User`s guide

VCore Page 142
Wiring Outputs
Non-inductive load
Non-inductive loads are resistive. Incandescent bulbs, LEDs and filament lamps do not
require additional hardware. Loads that do not have inductors, coils or transformers are
non-inductive loads.
1. Attach the appropriate Output pin (pin 1 for Output1, pin 2 for Output2, etc.) on the
Parallel Outputs connector to the positive terminal of the external power supply.
2. Connect the corresponding Output Return pin (pin 5 for Output1, Pin 6 for Output2,
etc.) to the positive terminal of the device that is receiving the output signal.
3. Connect the negative terminal of the device that is receiving the output signal to the
negative terminal of the external power supply.
Figure 17- An indicator lamp is a common example of a non-inductive load.