User`s guide

WinScript Live Timecode (SMPTE/EBU) Page 59
WinScript
WinScript Live Timecode
(SMPTE/EBU)
The following section will explain the different ways to configure global timecode (SMPTE/EBU) settings
for the show controller using WinScript Live. For information on timecode settings for a particular
sequence, see Sequence Clock on page 35.
Display the Timecode Configuration Dialog
To view the timecode configuration, click on the “Devices” button on the resource toolbar.
Click on the “Configure Timecode” button to bring up the configuration dialog.
The following dialog appears.