User`s guide

Show Controller External Control Page 73
WinScript
3. Use the "terminal" or "macro" of the TCP/IP Remote software to send the strings specified in the
"Triggers" (In our example: "on" and "off")
For a more detailed demonstration of how to use the TCP/IP Remote, go to
http://www.zinmansoftware.com/TCPIP-Vid.html.
Terminal Control
Any TCP/IP terminal software such as "Putty" can be used to send messages to start Sequences on the
V16Pro.
1: Setup TCP Server on Show Controller
1. Go to "Resources""Devices" from the menu bar and click "Add Device"
2. Name the Device anything you'd like. In this example, we'll use "puttyTerm"
3. Select "custom" for the make, model and version
4. Choose the Ethernet connector (A or B) that you will be connecting do. Select the "TCP/IP
Remote" protocol. Port "1000" is usually ok, but if you want a different port number, you can