User`s guide

Page 4 May 15, 2012 • Alcorn McBride TourTraXX User’s Manual • Rev 1.3
Playing a Test Sound
Every TourTraXX comes with a Compact Flash card preloaded with test sounds
already installed in the unit’s compact flash slot. To play test sounds, follow these
step-by-step directions.
• Using the included Audio Output Cable Harness, connect channel 1
of the TourTraXX to a set of powered speakers or to the input of an
amplifier.
• Using either the included Discrete Input/Power cable harness or a
custom cable of your own making, connect power to the
TourTraXX. The LCD display will indicate that the TourTraXX is
initializing and then display its current status when it’s finished.
• To quickly test playback, trigger input #1 by touching the Input 1(+)
and Input 1(-) wires of the included Discrete Input/Power cable
harness. This will trigger playback of file 1 on channel 1.
Connect to amplifier or
powered speakers