User`s guide

May 15, 2012 • Alcorn McBride TourTraXX User’s Manual • Rev 1.3 • Page 41
• Direct Support for GPS Input – GPS Builder automatically detects any
NMEA 0183 GPS input source. What this means is that you can connect
any GPS sensor to your Laptop, and get real-time geographical information
within the GPS Builder application itself. This includes information such as
Latitude, Longitude, Speed, Heading, etc.
• Real-Time Capturing of GPS Points – When a GPS sensor is connected
to your PC, GPS Builder can capture GPS points with the click of a button.
This makes programming your GPS trigger points a piece of cake. All you
have to do is drive the actual route using a laptop, and record each trigger
point as you pass through them. Later, you can fill in the commands that
you want to associate with each point.
• Online Map Support – GPS Builder interfaces directly with an online map
database. This database allows you to click on a location to obtain its
longitude and latitude. This information can then be entered into your GPS
Playlist. This feature allows users to program GPS Playlists without
traveling the actual route.
• TourTraXX Integration – This application contains a complete list of
built-in commands for the TourTraXX. There is no need to enter them
manually, and all command parameters (i.e. File Name, etc.) are described
in plain English.
Main Spreadsheet
The program uses a spreadsheet layout with horizontal rows that represent
specific tasks for the TourTraXX to execute, and vertical columns that
contain the various parameters associated with the particular task. Clicking