Manualshelf

User`s guide

ManualsBrandsAlcorn Mcbride ManualsGadgetsTourTraXX
51525354555657585960
Page 48 May 15, 2012 • Alcorn McBride TourTraXX User’s Manual • Rev 1.3
Command Bytes: <n><d><i>PL or "<filename>"<d><i>PL
Parameters: <n> is the ASCII file number between 0-99999
<filename> is the ASCII file name
<d> is either C followed by a channel number in ASCII, P followed by a
channel pair number in ASCII, or G followed by a channel group number in
ASCII
<i> is either U for uninterruptible playback or I for interruptible playback.
This parameter is optional.
Message Response: R
Comments: If no sound number or filename is specified, the file specified with the last
Search command (see below) will be used.
Channel numbers range from 1 through 16, Channel Pairs from 1 through 8,
and Channel Groups from 1 through 13. Use “*” for All Channels.
This command can also start the system playlist or can be used to force a
playlist to continue by using the ‘>’ character in place of a file number.
Examples: Play file 21 to Channel Pair 4. 21P4PL
Play file 9 to Channel 3. 9C3PL
Play file 1 to Channel Group 12. 1G12PL
Play file “music.mp3” to all channels. "music.mp3"*PL
Move the playlist on Channel Pair 1 to the next entry >P1PL
Loop Play - LP
Description: This command causes the TourTraXX to play a sound file, automatically looping it
back to the start when the sound finishes.
Command Bytes: <n><d><i>LP or "<filename>"<d><i>LP
Parameters: <n> is the ASCII file number between 0-99999
<filename> is the ASCII file name
<d> is either C followed by a channel number in ASCII, P followed by a channel
pair number in ASCII, or G followed by a channel group number in ASCII
<i> is either U for uninterruptible playback or I for interruptible playback. This
parameter is optional.
Message Response: R
Comments: If no sound number is specified, the number specified with the last Search command
(see below) will be used.
Channel numbers range from 1 through 16, Channel Pairs from 1 through 8, and
Channel Groups from 1 through 13. Use “*” for All Channels.
Examples: Play and loop file 21 to Channel Pair 4. 21P4LP
Play and loop file 9 to Channel 3. 9C3PL
Play and loop file 1 to Channel Group 12. 1G12LP
Play and loop file “music.mp3” to all channels "music.mp3"*LP
Play Toggle - PT
Description: This command causes the TourTraXX to toggle playback of a file. If currently
stopped, the file will play. If currently playing, the file will stop.