User`s guide

May 15, 2012 • Alcorn McBride TourTraXX User’s Manual • Rev 1.3 • Page 51
Pause - PA
Description: This command causes the TourTraXX to pause playback of the specified Channel,
Channel Pair or Channel Group. Playback is resumed whenever a Play
command is issued to the paused Channel Pair or Channel Group
Command Bytes: <d>PA
Parameters: <d> is either C followed by a channel number in ASCII, P followed by a channel
pair number in ASCII, or G followed by a channel group number in ASCII
Comments: Channel numbers range from 1 through 16, Channel Pairs from 1 through 8, and
Channel Groups from 1 through 13. Use “*” for All Channels.
Message Response: R
Examples: Pause Channel Pair 2. P2PA
Pause Channel Group 1. G1PA
Stop - RJ
Description: This command causes the TourTraXX to stop playback of the specified Channel,
Channel Pair or Channel Group.
Command Bytes: <d>RJ
Parameters: <d> is either C followed by a channel number in ASCII, P followed by a channel
pair number in ASCII, or G followed by a channel group number in ASCII
Comments: Channel numbers range from 1 through 16, Channel Pairs from 1 through 8, and
Channel Groups from 1 through 13. Use “*” for All Channels.
Message Response: R
Examples: Stop Channel Pair 2. P2RJ
Stop Channel Group 1. G1RJ