User`s guide

May 15, 2012 • Alcorn McBride TourTraXX User’s Manual • Rev 1.3 • Page 53
Playlists
Play System Playlist
Description: This command causes the TourTraXX to start a playlist as the system playlist (not
tied to any particular channel).
Command Bytes: <n>PL or “<filename>”PL
Parameters: <n> is the ASCII playlist number between 0-99999
<filename> is the ASCII playlist file name
Message Response: R
Comments: Playlists named ply00000.lst will automatically be started as the system playlist on
startup.
Examples: Start playlist 3 as the system playlist 3PL
Start playlist “cmds.lst” as the system playlist "cmds.lst"PL
Play Channel Playlist
Description: This command causes the TourTraXX to start a playlist on a specified channel pair
Command Bytes: <n><d>PO or “<filename>”<d>PO
Parameters: <n> is the ASCII playlist number between 0-99999
<filename> is the ASCII playlist file name
<d> is P followed by a channel pair number in ASCII
Minimum OS Version: TraXXOS 1.2.3
Message Response: R
Examples: Start playlist 3 as the channel 2 playlist 3C2PO
Start playlist “cmds.lst” as the channel pair 3 playlist "cmds.lst"P3PO
Stop Channel Playlist
Description: This command stops a channel playlist
Command Bytes: <d>RJ
Parameters: <d> is P followed by a channel pair number in ASCII
Message Response: R
Examples: Stop the channel 4 playlist C4RJ