User`s guide

May 15, 2012 • Alcorn McBride TourTraXX User’s Manual • Rev 1.3 • Page 57
Version Request
Description: This command is used to request the operating system version.
Command Bytes: ?V
Message Response: TourTraXX x.x.x
Where x.x.x is the current version of the installed firmware.
Example: Get current version. ?V
Note: The firmware version can also be obtained from the LCD menu.
Soft Reset
Description: This command issues a software reset to the unit.
Command Bytes: XX
Message Response: R
Example: Reset Unit. XX
Set Name
Description: This command gets/sets the user-readable name of the unit.
Command Bytes: <n>NM
Parameters: <n> is the desired ASCII name of the unit
Message Response: R
Comments: To get the current name of the unit, send NM without the <n> parameter.
Minimum OS Version: TraXXOS 1.2.5
Examples: Set unit name to “myTraXX”. myTraXXNM
Get the current unit name. NM