Assembly

2
step 1 - attaching the headboard legs
1.1
Place (A) headboard face down on
a flat surface. Place (B) headboard
legs on the back of (A) headboard,
aligning the slots of the legs with the
holes of the headboard.
Please note: Make sure the “Out”
sticker on each (B) headboard leg is
facing the correct way.
1.2
Attach (B) headboard legs to (A)
headboard using (H1) bolts and (H2)
washers. Tighten with a flat head
screwdriver.
step 2 - attaching the headboard to your bed frame
2.1
Attach the assembled headboard to
your bedframe using (H3) bolts, (H2)
washers and (H4) nuts. Tighten with a
flat head screwdriver and wrench.
Please note: The height of your
headboard can be adjusted by
loosening the (H1) bolts and shifting
the (A) headboard up or down.
A
B
standard headboard assembly
OUT