Assembly

2
step 1
1.1
Fit (B) seat into (A) back, making sure the
wooden dowel fits in the center hole.
Attach the center section using (H1) bolts,
(H2) spring washers and (H3) flat washers.
Tighten using (H5) wrench.
Please note: Before tightening, make sure
the bottoms of (A, B) are flush.
1.2
Finish attaching (B) seat to (A) back using
(H4) bolts, (H2) spring washers and (H3) flat
washers. Tighten using (H5) wrench.
standard dining chair assembly