Instruction manual

P. 7
Setting
1. Date & Time
i. Set correct Date and Time.
ii. Select “Update” to confirm.
2. Auto Off
i. Select time limit to turn off the device automatically.
ii. Select to confirm
3. Print
i. Select “Auto Print” to print the result automatically after each test without
selecting “Print”.
ii. Select number of printout copies needed for test result equal to 0 ( =0 )
and exceed 0 ( >0 ).
iii. Select to confirm.
NOTE: If no printout needed for a test result equal to 0, select “0” for
“=0”.
4. Cali
i. When the screen displays “Calibration Needed”, send the device for
calibration.
ii. A password is needed for calibration to ensure calibration is performed
by eligible persons.
iii. Please refer to Calibration Instruction.
5. Advanced Setting
i. Only legitimated persons are allowed for advanced setting.
ii. A Password is needed.
iii. Please refer to Advanced Setting Instruction.
6. Keyboard
i. Disselect “Keyboard” to turn off the keyboard.