Operating instructions

FITTED EQUIPMENT
153
FITTED EQUIPMENT
152
Operating instructions for
softrollo blinds
Hold the operating aluminium bar in the middle
and raise or lower the blind and flyscreen
independently, operating together will require
excessive force in operation.
Care instructions: Clean the blind only with
a damp sponge. Clean on a regular basis to
avoid dirt particle build up as this can damage
the blind material.
Use only water or with mild suds or a vacuum
cleaner.
In order to avoid material fatigue, do not leave
the flynet closed for a long time.
Maintenance
If operation of the soft Rollo blind is
exceptionally stiff, it is possible to spray the
guide - legs (left and right) with a Teflon - spray.
This will ease both the operation of the blind
and avoid any interruption/malfunction from
deposits in the guide legs which may affect the
operation.
Doorscreen
When drawing or releasing the doorscreen,
care should be taken to always pull the
doorscreen close to the centre. It is not
advisable to pull close to the top or bottom as
this will cause snagging and uneven running.
! WARNING: When opening or releasing
the doorscreen, care must be taken to avoid
trapping fingers.
The door flynet operates independently of the
door by sliding across the door threshold.
Roof lights
When opening the roof lights, care must be
taken to release the locking mechanism as the
unit is raised.
Roof lights must be fully closed when towing.
Roof lights provide varying levels of fixed
ventilation.
Exterior Door Key
! WARNING: Care should be taken not to
leave the exterior door key in the door when
unlocking the door. The key may result in
damage in the vehicle side if the door is
released with the key still in the lock.
Windows
To open all window types turn the internal
handles through 90 degrees and push open
the window.
Windows / Roller Blind Advice
In case of prolonged exposure to the sun roller
blinds should not be completely closed as this
could cause excessive heat concentration at
the top of the window, due to characteristics
of the glazing material the windows could be
adversely affected.
Roller blinds that shade from the bottom
upwards it is necessary to leave a gap of a few
centimetres open at the top, this way the heat
between window and blind can escape. A fly
screen does not cause an obstruction.
Roller blinds that shade from the top
downwards must be kept completely open,
or be opened regularly to allow the heat to
escape.
Keeping the windows in ventilation position
allows heat to escape.
Never fully close a roller blind system when
storing the vehicle or when not in use for
longer periods!
Therefore for optimal window life it is
recommended:-
• Blinds starting at the bottom of the window a
gap should be provided for ventilation at the
top with the window in its ventilation position.
• For vehicles containing blinds from the top
downwards or with other types of reflective
blinds / curtains, please make sure that
these blinds are also ventilated or not fully
closed.
Ensure that all windows and roof vents are
closed when the vehicle travels on the road.
BEDDING / BLINDS
ROOF LIGHTS / EXTERIOR DOOR
/ WINDOWS
Fig. D
Fig. E
Fig. F
Fig. G