Operating instructions

FITTED EQUIPMENT
167
The door flyscreen is tracked top and bottom
and operation must be by the centre of the
handle to aide a smooth operation.
The door blind slides vertically within the door
cassette.
FITTED EQUIPMENT
166
• Using a small screwdriver, press the pairing
button on the rectangular plate between the
number plate lights. (Fig. 3)
• Once pairing is complete, an image will be
displayed on the screen.
Sliding door operation
When fitted, to operate the lock turn the
rotating handle clock-wise to un-lock and slide
the door open. Care must be taken to ensure
it is closed and the lock is fully engaged for
transit.
Shower door operation
The Bi-Fold shower door is tracked to improve
its operation (Figure a), the transit catch is
located above the door and care must be
taken to ensure that this is in the locked
position (Figure a) for towing.
Gas locker door operation
Your vehicle is fitted with a single lever three
point locking mechanism. To operate, firstly
unlock the door with the key turning through
180 degrees anti-clockwise. Once unlocked,
use the recess to the right of the handle
(Figure a) to pull open the handle ensuring it is
fully extended (Figure b). Then fully rotate the
handle anti-clockwise (Figure C) before you
open the door. To close and lock the door
reverse the steps c to a.
Exterior Door Operating
Instructions
To un-lock the door, insert the key and turn
clockwise ensuring the key is removed before
the door is opened to prevent damage to the
caravan side.
There are 3 primary positions for the internal
handle inside the caravan, these are locked,
neutral and open. When closing the door from
the inside the caravan ensure the handle is in
the neutral position, The handle MUST NOT
be partially up in the locked position as this will
prevent the door from closing causing damage
to the door
DOOR OPERATION