Operation Manual

4
3. STARTING THE BOILER
5. SETTINGS MENU
Launch the settings menu by pressing the MENU button. The backlighting comes on and the functions that can be set
are displayed. The control panel will go to standby automatically after 30 seconds if the screen has not been touched.
2. Control panel showing the settings menu.1. Control panel in standby mode.
1 kW
+22°C
22°C
6°C
Fri 18.30
3020
High Efficiency
2. To start the boiler, press the On/Off button and the start-up display ap-
pears. The boiler starts with the last selected settings.
1. The control panel and the boi-
ler are switched off.
4. STANDBY
A. Clock. The clock shows the day and
time (if activated). To set the clock, see
under section 1 item 2.
B. *Exterior temperature. The outside
temperature is displayed.
C. Interior temperature. The inside tem-
perature is displayed.
D. Circulation pump. This symbol is dis-
played when the pump is in operation.
E. Automatic boiler start. This symbol is
displayed when the function is activa-
ted in accordance with section 7:1 item
1.
F. Day auto. This symbol is displayed
when the function is activated and the
time is within the set time period in
accordance with section 7:1 item 5.
G. *LPG bottle full/empty. This symbol
is displayed when the sensor on
DuoControl is connected and activated
in accordance with section 9:14 item
18. If EisEX is installed, the symbols
for the set mode are displayed along
with the bottle symbol.
H. Night auto. This symbol is displayed
when the function is activated and the
time is within the set time period in
accordance with section 7:1 item 4.
I. 230 volt. This symbol is displayed
when a 230 V power supply is connec-
ted to the boiler.
J. On/Off button. Main switch for boiler.
K. MENU button. Button for the settings
menu.
22°C
6°C
Fri 18.30
D
C
A
J
K
I
B
E
NB! If “Standb. Screen” in the Backlight menu is set to Dark, the display goes out when it enters standby mode but
lights up if you touch the screen. See settings under section 1, item 10.
F
G
H
Activated functions, see section 6
Tools menu, see section 7.
Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle
manufacturer's instructions.