Operation Manual

5:1 SET THE DESIRED TEMPERATURE

The temperature can be set between +5°C and +30°C in increments of 0.5°C. NB! If day or night auto is active,

refer to section 7:1 items 4 and 5, temperature settings cannot be made. The plus and minus characters

will then be grey.

1. The temperature displayed is the temperature

which is currently set.

2. Increase the temperature by pressing the + button.

Reduce the temperature by pressing the – button.

3. The settings are now complete and the boiler will

work at the set temperature.

5:2 DOMESTIC HOT WATER

1. No warm water. If warm water is not needed, press -.(symbol becomes empty).

NB! If day or night auto is active, refer to section 7:1 items 4 and 5, and

the hot water has been turned off there, the hot water settings cannot be

made. The plus and minus characters will then be grey.

1 kW

+22°C

1 kW

+22°C

Info! When hot water only is required, during the summer for instance when

there is no need for heating, no settings need be made; the boiler looks after

this function automatically.

3. More hot water. If you need more hot water, you can temporarily increase the

water temperature to around 65°C. Press the + button so that the symbol shows

fully shaded (black). The boiler returns to normal operation after 30 minutes.

Once you have selected more hot water, the circulation pump stops. NB! If

function 7:1 item 12 Pump operation has been set to Cont, the continuous

pump operation is put out of action for 30 minutes but then returns to

continuous pump operation.

1 kW

+22°C

2. Normal operation. If there is freshwater in the heater and hot water is required,

press the + button (the symbol will then show half-shaded). NB! If function

7:1 item 12 Pump operation has been set to Cont, this option cannot be

selected.

The Alde boiler stores 8.4 Litres of hot water as standard. If the hot water cylinder is empty, the air is heated but no

damage can result. There are three different settings options for controlling the boiler in terms of hot water, no hot

water, normal operation and more hot water requirements.

Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle

manufacturer's instructions.