Operation Manual

7
GB
1 kW
+22°C
6. ACTIVATED FUNCTIONS A
Activated Functions
A
Night auto is activated. However, it does not
have to be within the time/day setting.
Automatic boiler start is activated. However, it
does not have to be within the time setting.
This function is used in cases where an exter-
nal main panel can be used to operate some of
the boiler functions or if *Alde Smart Control is
installed.
Displayed if one or two external room sensors
are connected.
Circulation pump in continuous operation.
NB! This function limits the supply of hot water,
particularly when there is a low heating require-
ment.
Day auto is activated. However, it does not have
to be within the time/day setting.
The boiler is set to be started with External start
but has not necessarily been activated.
Load monitor is connected and set to limited
current.
Booster is on.
AC is on in the panel but it is not necessarily in
operation.
EisEx is installed but not necessarily turned on.
DuoControl or DuoComfort is installed and con-
nected to Alde Compact 3020 HE
Timer for engine heater is set but not necessa-
rily within the set time/day.
Floor heating is in operation.
Figure 1 Figure 2
Pressing A (see gure 1) will enable continuing to activated functions (see gure 2). This screen shows the various
functions that are activated. From here, you can go directly to each activated function and make new settings.
NB! A symbol is only visible if any of the functions shown below are activated and/or installed.
The following is a description of what the different symbols in the menu (Activated Functions) mean when shown.
Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle
manufacturer's instructions.