User's Manual

All rights reserved. Passing on and copying of this document,
use and communication of its contents
not permitted
without written authorization from Alcatel.
2.3 Environmental requirements
These are the same as for the terminal for which this board is intended. The tests are made on the
daughter board mounted in a final product, so they are part of the product qualification.
This BTDB board cannot be co-located with other transmitters. If mount this board on final product,
Should add FCC ID and IC information in the product label (FCC ID: OL3BTMOD02, IC: 1737D-
BTMOD02).
For a host manufacture’s using a certified modular, if (1) the module’s FCC ID is not visible when
installed in the host, or (2) if the host is marketed so that end users do not have straightforward
commonly used methods for access to remove the module so that the FCC ID of the module is
visible; then an additional permanent label referring to the enclosed module: “Contains Transmitter
Module FCC ID: OL3BTMOD02, IC: 1737D-BTMOD02” or “Contains FCC ID: OL3BTMOD02,
Contains IC: 1737D-BTMOD02” must be used. The host OEM user manual must also contain clear
instructions on how end users can find and/or access the module and the FCC ID.
This equipment complies with radio frequency exposure limits set forth by the Innovation, Science
and Economic Development Canada for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 15mm between the
device and the user or bystanders.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites d'exposition aux radiofréquences définies par la
Innovation, Sciences et Développement économique Canada pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 15mm de distance entre le dispositif
et l'utilisateur ou des tiers.
Ce dispositif ne doit pas être utilisé à proximité d’une autre antenne ou d’un autre émetteur.
For details see for example the Smart Deskphone 8088 HW external specification (see ref [2])