Installation Instructions

Gaze Assistant IntelliGaze™ Installation & Service Manual

Hotkey Function Comment

Enter

Starts the test at the chosen position

Escape

Interrupts or ends the test

1-6

Select a position to start a scan Very often it's enough to just

test the outer lines ( 1,3,4,6)

9.2.5 Blink Test

The blink test measures the user's blink behavior. During the test the user is supposed to look at the

target and perform a couple of blinks he would use to trigger actions with the eyes. The system will

measure the average blink duration.



The blink test gives a recommendation for the minimum blink duration that should be used by IntelliGaze or a

third party communication software to trigger clicks with eye blinks.

Hotkey Function Comment

Escape

Interrupts or ends the test

9.2.6 Calibration

The calibration test allows the user to perform a calibration with the settings that where found in pre-

vious tests. Decide for the number of points, the calibration area and the eye that needs to be cali-

brated according the field of view test.

Version: 3.0