GEBRAUCHSANWEISUNG Aktiv/Passiv Lautsprecher PAS-212 (A/P)1
PAS-212A 1 Optional 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PAS-212P Optional 1: Höhenstange MPA Ständer Optional 1 2 3 2: Sicherungssplint 4 3: Sicherungsschraube der Höhenstange 4: Sicherungsschraube des Stativfußes Lautsprecheranschluss für Verstärker oder PAS-212A 2
FUNKTIONEN MP3 Player mit Bluetooth® Funktion. SD-Kartenleser für SD Karten (max. 16G). Display des MP3 Player. USB Eingang. (USB 2.0) Bedienungspannel des MP3 Player. Eingang für Mikrofonsignale mit XLR-Eingang oder 6,3 mm Stereostecker (symmetrisch oder balanciert) mit Lautstärkeregler. 7. Eingang für Line-Signale mit XLR-Eingang (symmetrisch),3,5mm Stereostecker oder Cinch Stereoeingang mit Lautstärkeregler. 8. Hoch und tief Ton Regler. 9. Ausgang mit Speakonstecker für extra passive Lautsprecher.
VOR DER BENUTZUNG Der PAS-212A funktionier über das Lichtnetz. Der PAS-212P funktioniert über einen separaten Verstärker oder mit dem PAS-212A, mit den mitgelieferten Lautsprecherkabel, mit Speakonstecker. NETZSPANNUNG: Schließen Sie den PAS-212A nur an eine Netzspannung von 230 Volt an. In den meisten europäischen Ländern arbeitet das Lichtnetz auf 230 Volt. Schließen Sie den PAS-212A mit dem mitgelieferten Netzkabel an das Lichtnetz an.
FUNKTION MP3 PLAYER Der MP3 Player kann MP3 und WMA Dateien von einer SD/MMC Card oder einemUSB Stick abspielen oder Audio über Bluetooth® Verbindung. EIN / AUSSCHALTEN DES PLAYERS: • Sobald der PAS-212A eingeschaltet wird, dann wird der Player automatisch eingeschaltet. • Indem Sie die Taste MODE an dem Player 2 Sekunden gedrückt halten, können Sie den Player manuell ein oder ausschalten. • Indem Sie die Taste MODE an dem Player kurz drücken wird die Funktion Bluetooth® eingeschaltet.
BEDIENUNG ÜBER DIE FERNSTEUERUNG: Achtung: Das Infrarotauge befindet sich an der Vorderseite von dem Lautsprecher. Die Vorderseite ist die Ausstrahlöffnung des Lautsprechers. um das Abspielen zu stoppen kurz drücken, um zwischen der SD/MMC Card oder dem USBStick zu wechseln, im Fall, das Beide angeschlossen sind, oder Bluetooth® Verbindung. kurz drücken, um den Ton auszuschalten (das Abspielen wird weiter vorgesetzt); nochmals kurz drücken, um den Ton wider einzuschalten.
Equalizer: benutzen Sie diese Funktion, um den Ton anzupassen an die Art der Musik. Sie haben die Auswahl: Normal, Pop, Rock, Jazz, Classic(*). um direkt einen Track auszuwählen (für Track 1-999) *: Grafische Übersicht von den möglichen Equalizer-Einstellungen: luetooth Um Gebrauch zu machen von der kabellosen Bluetooth® Funktion, muss der MP3 Player an das andere Bluetooth®Gerät angemeldet werden, auf welchem die Musik ist (Handy, Tablet PC, usw.). Das Anmelden geht auf folgende Weise: 1.
OPTIONAL ERHÄLTLICH EXTRA LAUTSPRECHER: Es ist möglich den PAS-212P als extra Lautsprecher an den PAS- 212A anzuschließen. Das Signal kommt in diesen Fall von dem PAS-212A Lautsprecher in dem eine Tonquelle eingebaut ist. Schließen Sie mit dem mit gelieferten Lautsprecherkabel die zwei Lautsprecher wie auf die unterstehende Weise an. Der PAS-212P ist als extra Lautsprecher für den PAS-212A zu bestellen.
UMWELT: • Die Verpackung von diesem Set können Sie zum Altpapier geben (außer Kunststoff und Plastik). Wir empfehlen aber diese aufzubewaren, damit bei einem Transport, das Set ausreichend • verpackt werden kann. Soll das Set entsorgt werden, dann geben Sie es bitte bei ihrem Lieferanten ab. Er sorgt für eine umweltfreundliche Verwertung.
GARANTIE Bewahren Sie hier Ihren Kassenbon oder Kaufquittung auf Name: Adresse: Postleitzahl / Ort: Modell / Serienummer: Auf das Alecto PAS-212 gewähren wir eine Garantie von 24 Monaten, nach Ankaufsdatum.Wir garantieren in dieser Zeit die kostenlose Reparatur von Schäden die auf Material- und Konstruktionsfehler beruhen. Dies unterliegt der Beurteilung des Importeurs. Wie zu verfahren ist: Bemerken Sie einen Defekt, ziehen Sie erst diese Gebrauchsanleitung zu Rate.
ANSCHLUSSSCHEMA BALANCIERT / UNBALANCIERT Stereo Kopfhörer: unbalanciert mono: Spitze ist Signal links balanciert mono: Spitze ist Signal Spitze ist Signal + Ring ist Signal rechts Ring ist Signal Schaft ist Masse, Erde oder Abschirmung Schaft ist Masse, Erde oder Abschirmung Spitze Ring Schaft ist Masse, Erde oder Abschermung Spitze Schaft Zugentlastung Spitze Ring Schaft Schaft Zugentlastung Zugentlastung Balanciertes XLR Kabel: 2 1 PIN 1 ist Masse, Erde oder Abschiermung 1 PIN 2 ist
Service Help Aziëlaan 12 ‘s-Hertogenbosch WWW.HESDO-SERVICE.NL INFO@HESDO-SERVICE.NL SERVICE@ALECTO.DE NL +31 (0) 73 6411 355 FR +32 (0) 3 238 5666 DE +49 (0) 180 503 0085 Service Aziëlaan 12 ‘s-Hertogenbosch Help WWW.HESDO-SERVICE.NL INFO@HESDO-SERVICE.NL SERVICE@ALECTO.DE NL +31 (0) 73 6411 355 FR +32 (0) 3 238 5666 DE +49 (0) 180 503 0085 V1.