Operation Manual

INTRODUCTION:

. POWER ON/OFF switch

2. Capacitance jack (TM-56 only)

3. LCD display

4. Temperature jack (TM-56 only)

5. Range switch

6. Transistor jack

7. COM input jack

HOLSTER

The supplied holster protects the tester against damages during use and transport.

You may use the tilt stand to set the tester in an angle on a flat surface. You may select 2

positions, refer to the drawing.

To protect the testprobes during transport, you can store them on the clip of the holster

(backside).

STRAP

Refer to the drawing how to attach the supplied strap. (p. 19)