User's Manual

“The Stocky” User Guide
Page 5 of 29
2.0 “The Stocky” Series
“The Stocky” is available in different configurations (See Below)
7000 Standard Unit
7000BT Standard Unit with BlueTooth
7020 With RFID Counter
7020BT With RFID Counter and BlueTooth
3.0 Connecting “The Stocky” to scale indicators or computers
3.1 Connecting to scale indicators
“The Stocky” comes with a 5 metre computer cable. Plug the 9 pin lead into “The
Stocky”
and into the scales serial port. “The Stocky” must be in serial mode if
BlueTooth is fitted. To select a serial connection press and hold down the
NEW SESSION button and then press the ON button. The BlueTooth LED
will go out.
2 beeps are heard if BlueTooth is enabled or 3 beeps if Serial is enabled.
“The Stocky” will automatically send each RFID you read to the connected scale
indicator. You may need to contact your scale indicator manufacturer for specific
setup requirements on the indicator.
You may also connect your reader to the scale indicator via BlueTooth if you have a
7000BT or a 7020BT. The scale indicator must be able to support BlueTooth
connection. Contact the scale indicators manufacturer for further details.
Reader
Wand
Read button