User's Manual

“The Stocky” User Guide
Page 7 of 29
4.0 “The Stocky” Keypad explained
If you have a 7000 or 7020 the Bluetooth LED will not be fitted. It’s only fitted
on the 7000BT & 7020BT models
7000BT KEYPAD
• This LED comes on when the reader is
turned on and flashes when the battery
charge is low.
• This LED comes on when the reader is
being charged.
• This LED flashes once when an RFID
has been read.
• This LED flashes once when an RFID
has been stored in the reader’s memory.
• Press this button to turn the reader on.
• Hold this button down for five seconds
to create a new session on the reader. If
you want to clear the reader, hold this
button down and press the read button
(the button on the wand) three times.
Hold this button down while pressing the
ON button to toggle between Serial
Connection and BlueTooth
This LED
comes on
when
Bluetooth
is fitted and
turned on.