Use and Care Manual

10
www.AlekoDrywallSander.com
10.3 Using the telescopic length extension (Fig.6/7)
Unscrew the lock for the telescopic length extension (3) approx.2-3 turn (Fig.6) Now the
telescopic length extension (4) can be pull out (Fig.7)
10.4 Swiveling grinding/sanding disk (Fig.8)
The grinding/sanding disk swivels on 2different axes and therefore enables comfortable
grinding/sanding even for overhead work and for working in small spaces.
11. Replacing the power cable
If the power cable for this appliance is damaged. It must be replaced be the manufacture or its
after-sales service or similarly trained personnel to avoid danger.
12. Cleaning, maintenance and ordering of spare parts
Always pull out the mains power plug before staring any cleaning work.
12.1 Cleaning
 Keep all safety devices, air vents and the motor housing free of dirt and dust as far as
possible. Wipe the appliance with a cloth or blast it with compressed air at low pressure.
 We recommended that you clean the appliance immediately after you use it.
 Clean the appliance regularly with a damp cloth and some soft soap. Do not use
cleaning the agents or solvents; these may be aggressive to the plastic parts in the
appliance. Ensure that no water can get into the interior of the appliance
12.2 Carbon brush
 In case of excessive sparking, have the carbon brushes checked only by a qualified
electrician.
Caution: The carbon brushes should be replaced by anyone but a qualified electrician.
12.3 Servicing
 There are no parts inside the appliance which required additional maintenance.
12.4 Ordering replacement parts
Please provide the following information on all orders for spare parts
 Model/type of the appliance
 Article number of the appliance
 ID number of the appliance
 Spare parts number of the required spare parts for our latest prices and information
please go to www.AlekoDrywallSander.com
12.5 Changing the brush ring (Fig.9/10)
 Loosen the six screws with a screwdriver. Lift the brush ring carefully out with the
screwdriver. To assemble the new brush ring proceeds in reverse order.
13. Disposal and recycling
The appliance is supplied in packaging to prevent its being damaged in transmit. This packaging
is raw material and can therefore be reused or can be returned to raw material system. The
appliance and its accessories are made of various types of material, such as metal and plastic.
Defective components must be disposed of as special waste. Ask your dealer or your local
council.