Replacement Part List

🔧 ASSEMBLY

Assemble the fabric.

• Unfold canopy (M) and valance (O).

• Thread two fabric liner (N) to both ends of (M) and (O); two people will make this much easier.

• Once (N) has been threaded through both sides of (M), thread the back side of (M) and its liner

through the slot in the assembled fabric roller (A) all the way to the end.

• Use the roller tube to roll canopy (M) into the assembled fabric roller (A).

• Thread the front side of (M) through the slot in the assembled front bar (C).

• Repeat steps c-d to thread valance (O) into front bar (C).

• Insert fabric roller end caps (F-1) and (F-2) into the ends of assembled fabric roller (A).