Installation Guide

8
WARNING DO NOT REMOVE THE SAFETY SLEEVES THAT HOLD THE ARMS DOWN!
🔧 ASSEMBLY
Assemble to torsion bar (B)
• Insert torsion bar link (B-3) into torsion bar (B-2) and tap into place with a mallet.
• Use (B-B-1) screws to secure (B-3) in place.
• Insert torsion bar link (B-3) into torsion bar (B-1) and tap into place with a mallet.
• Use (B-B-1) screws to secure (B-3) in place.