Instructions / Assembly

BEFORE YOU START

Warning: To ensure the longevity of your motor, please do not submerge it in water, hit or drop it, or drill it. Also, double

check that the power cord is not damaged.

STEP ONE: DRIVE ADAPTER INSTALLATION

1. Place the gear onto the motor, as seen in the diagram. This will allow your motor to spin.

2. Secure the gear to the motor with the provided screw.

3. Once the gear is attached to your motor, ensure that it is fully secure.

4. Finally, place the motor into the awning tube.

STEP TWO: PROGRAMMING THE REMOTE

☻ MOTOR INSTALLATION

IMPORTANT: While programming your remote, you must complete all the steps

(1-4) within 10 seconds. Failure to do so will result in starting over.