Instructions / Assembly

🔨 INSTALL THE WINDOWS AND LOCK SET
The window hinges also have ball bearings, so the windows are simply lifted into place and latched closed.
Install the lock mechanism and put the handles on the doors.
Installation is complete!
If you have additional questions, please contact ALEKO Customer Support through our website at
www.AlekoProducts.com
In the previous image, the bottom of the door jamb must be moved to the left slightly. The door tops and bottoms will
line up perfectly in the center when the jamb is square.
Next, check that your doors close evenly from top to bottom. If, when you close your door, the top or the bottom
touches the astragal rst, the jamb is slightly twisted. You can adjust this by moving the appropriate lug inward (toward
the inside of the house) or outward (toward the outside of the house) until the doors close evenly, top and bottom, at
the same time. Once everything is adjusted correctly, secure the lower lugs in place with the lag bolts. Check the t of the
doors once again to make sure that nothing moved out of place while tightening the bolts..
If You Have Sidelights and/or a Transom
If you have separate sidelights you will use joining bolts to x them to the door jamb rst. Apply all weather caulking
between the sidelights and the jamb before joining. Once joined together, the whole unit will be bolted to the house
framing as per the instructions above.
If you have a separate transom, it is mounted above the door jamb and fastened into the framework just like the door.
Install the door jamb rst, and then install the transom. Apply caulking to the bottom of the transom before joining it to
the door jamb..