Instructions / Assembly

Flush Bolts
Keep the inactive
door closed by using
the ush bolts
🔨 INSTALLING THE JAMB
Even though you have checked the plumb of your framing, small adjustments may be needed to ensure that your doors
are installed correctly.
With the doors closed, looking from inside, check that the two doors line up together in the center (look at the tops
and bottoms of the two doors). If they do not, then the jamb is slightly out of alignment. You must move the bottom of
the jamb to the left or right until the doors line up exactly. See the image below for an example of a door jamb out of
alignment.