Replacement Part List

www.ALEKOPRODUCTS.com
2
Important Safety Precautions
WARNING NOTE: FOR PERSONAL SAFETY, IT IS IMPORTANT TO FOLLOW THESE
INSTRUCTIONS, PLEASE KEEP THIS MANUAL IN A SAFE PLACE
This warning triangle calls attention to hazards that can lead to death or serious injuries.
This sign identifies important notes.
Read these instructions carefully
before you begin the assembly.
The awning is primarily intended for protection
against the sun. In case of wind, heavy rain or
snow it should be closed immediately.
Operating the awning in winter conditions can
result in damage or malfunction of awning
components.
WARNING: DO NOT REMOVE SAFETY BANDS FROM THE ARMS UNTIL
INSTRUCTED TO DO SO.
Before the assembly please check
whether all of the delivered assembly
components are of the right type and
their amount is correct. Refer to the
parts list (page 4) to see what pieces
have to be in the box.
Required Tools: (NOT INCLUDED and
may
vary depending on installation conditions)
Drill; Masonry drill bit, 16mm;
Wrench:9/16(14mm),11/16(17mm),3/4(19m
m); Allen wrench : ¼" (6mm);
Phillips screwdriver; Needle-nose pliers;
Level, Measuring tape, Chalk line, Pencil;
Step ladder.
WARNING:
The awning is heavy. A minimum of two persons is required to hang the
awning onto the wall brackets.
WARNING:
Do not allow children to play in the work area during assembly and
adjustments.
WARNING: DO NOT TRY to mount the awning alone.
If the awning falls, it may cause serious injuries or get damaged.
Please make sure that your hands
are clean before the assembly,
otherwise you may leave stains on
the awning fabric and frame.
Before starting the assembly, check the load
capacity of the wall and if necessary take
actions to ensure a proper installation of the
wall brackets. If the wall is unstable, you may
want to ask a specialist in your area.