DE HU MI DIF IER MDF-50AE MDF-70AE MDF1-30AE Before operating this product, please read the instructions carefully and save this manual for future use.
ATTENTION Before you use your dehumidifier, please read this instruction manual carefully. SAFETY NOTES 1. Do not connect unit to any AC electrical socket that is damaged. 2. Ensure filter and removable water tank are correctly installed before turning on unit. 3. Always turn off the dehumidifier at the control panel when not in use and before unplugging. 4. Do not use in the following locations: I. Next to source of heat e.g. a radiator or heater, tumble dryer etc. II.
SAFETY PRECAUTIONS To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is classified by the following indications. ! WARNING This symbol indicates the possibility of death or serious injury. ! CAUTION This symbol indicates the possibility of injury or damage to property. Meanings of symbols used in this manual are as shown below. Never do this.
SAFETY PRECAUTIONS ! Do not cover the intake or exhaust openings with cloths or towels. ! A lack of air flow can lead to overheating and fire. ! When the unit is to be cleaned, switch off, and turn off the circuit breaker. Do not clean unit when power is on as it may cause fire and electric shock, it may cause an injury. ! Always insert the filters securely. Clean filter once every two weeks. Operation without filters may cause failure.
CONTROL PADS ON THE DEHUMIDIFIER Continuous Power on indicator light operation on indicator light Bucket full indicator light High fan indicator light 5 Power Normal fan indicator light Normal Continuous C Turbo Full Humidity% 1 2 4 3 Fig.1 Control pads 1 POWER Pad 4 Fan speed Pads Control the fan speed. Press to select either High or Normal fan speed. Set the fan control to High for maximum moisture removal.
IDENTIFICATION OF PARTS Identification of parts Front 1 Handel Control panel 2 Air outlet grille Air outlet grille Control panel Air intake grille Handel Air intake grille Water bucket Water bucket Water level window Water level window Fig.2 NOTE: All the pictures in the manual are for explanation purposes only. The actual shape of the unit you purchased may be slightly different, but the operations and functions are the same.
OPERATING THE UNIT Positioning the unit A dehumidifier operating in a basement will have little or no effect in drying an adjacent enclosed storage area, such as a closet, unless there is adequate circulation of air in and out of the area. Do not use outdoors. This dehumidifer is intended ofr indoor residential applications only. This dehumidifier should not be used for commercial or industrial applications.
CARE AND MAINTENANCE Removing the collected water 1. Pull out the bucket a little. There are two ways to remove collected water. 1. Use the bucket When the bucket is full, the unit will automatically stop running, and the Full indicator light will flash. Slowly pull out the bucket. Grip the left and right handles securely, and carefully pull out straight so water does not spill. Do not put the tank on the floor because the bottom of the bucket is uneven.
CARE AND MAINTENANCE Care and cleaning of the dehumidifier Turn the dehumidifier off and r emove the plug from the wall outlet before cleaning. 1. Clean the Grille and Case Use water and a mild detergent. Do not use bleach or abrasives. Do not splash water directly onto the main unit. Doing so may cause an electrical shock, cause the insulation to deteriorate, or cause the unit to rust. The air intake and outlet grilles get soiled easily, so use a vacuum attachment or brush to clean.
TROUBLESHOOTING TIPS Before calling for service, review the chart below first yourself. Problem Unit does not start Dehumidifier does not dry the air as it should What to check , Make sure the dehumidifier s plug is pushed completely into the outlet. Check the house fuse/circuit breaker box. Dehumidifier has reached its preset level or bucket is full. Tank is not in the proper position. Did not allow enough time to remove the moisture.
220266A044
