User Manual

ManualsBrandsAlera ManualsFurnitureAlera ALECME7218PY Economy Assembled Storage Cabinet, 36w x 18d x 72h, Putty

Please Retain Instructions for Future Reference

READ THIS FIRST:

PK-2770712

Welded Economy Storage Cabinets

•

BEFORE discarding carton, check all contents for

damage or missing parts.

•

CABINET KEYS are attached with a zip-tie to the

inside of the cabinet right door.

•

For fastest and damage-free installation, please

carefully read and follow the assembly instructions.

•

Do not use power tools on product.

•

For product returns, parts and support, please call

1 (800) 733-4000.

Model Numbers: ALE-CME7218PY, ALE-CME4218PY

CAUTION: Use caution when handling and assembling metal parts. Metal may have sharp edges or corners.

Manufacturer recommends the use of protective gloves while making adjustments to the product.

• This unit should be installed on a level surface.

• Do not use this unit as a step ladder. Do not climb on the unit.

• Do not exceed the manufacturer's recommended weight capacity of 150 lbs. / 68 kg. on each shelf for 18"d and 200 lbs. / ?? kg. on each shelf for 24"d.

• Always distribute weight evenly on shelves.

• The manufacturer recommends the storage of heavier items on bottom shelves.

All assembly instructions must be followed exactly or the unit may not be assembled correctly and may not be stable. Install the unit on a level surface.

Safety Instuctions

Summary of content (2 pages)

PAGE 1
Welded Economy Storage Cabinets Model Numbers: ALE-CME7218PY, ALE-CME4218PY Please Retain Instructions for Future Reference READ THIS FIRST: • BEFORE discarding carton, check all contents for damage or missing parts. • CABINET KEYS are attached with a zip-tie to the inside of the cabinet right door. • For fastest and damage-free installation, please carefully read and follow the assembly instructions. • Do not use power tools on product.
PAGE 2
Shelf Adjustment 1. Using a flat-head screwdriver, gently pull the dimpled tab away from the hole in the shelf edge. This will allow the shelf to be released and lifted from the tab. 2. Place the shelf at the desired level. 3. Insert the shelf edges into the tabs at the new location. Be sure that the shelf is securely fitted into the tabs at all points of contact.