User guide

www.aleratec.com
40
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup - continued
11.03DVDBurnSpeed
This setting controls the writing speed of the DVD Recorders when
burning DVDs. The default setting is “Auto”, which will use the highest
writing speed of the recorders for the blank media being used. Sometimes
“Maximum” writing speed causes a high failure rate due to poor DVD
quality or unstable DVD writing due to high speed. Lowering the writing
speed will increase the probability of making successful copies.
1. Press the ENT button to change the setting, or ESC to exit.
2. Use the arrow buttons to select the desired speed, then press the ENT
button.
11.04ReadSpeed
This function sets the reading speed of the source DVD Recorder.
1. Press the ENT button to change the setting, or ESC to exit.
2. Use the arrow buttons to select the desired reading speed, then press the
ENT button.
11-03. Setup
DVD Burn Speed


ESCENT
Burn Speed
(Speed)


ESCENT
11-04. Setup
Read Speed


ESCENT
Read Speed
16X


ESCENT