User guide

www.aleratec.com

Using the DVD/CD Copy Tower Pro HS

12.03ReadErrorSkip

You can set error skipping function while reading discs with errors. The default

setting is OFF. If an error is detected during source loading, the duplicator

will stop loading and display the error message. If the setting is ON, there

will be no message shown even if there is an error in reading. You can use this

function to copy some DVDs with errors.

1. Press the ENT button to change, or ESC to exit.

Read Error Skip

Off



ESCENT

12-03. Adv Setup

Read Error Skip



ESCENT