User guide

www.aleratec.com
56
Using the DVD/CD Copy Tower Pro HS
Main Menu
Advanced Setup - continued
12.06Burn-in
Burn-in is a test function. You can set up to test continuously or for a
specied number of cycles.
1. Load the source disc in one of the DVD Recorders and blank media
in one or more of the other DVD Recorders. The copy process will be
simulated, but data will not be written to the target discs.
2. Go to Burn In and press the ENT button to enter. You can select Test to
simulate duplication of CDs/DVDs or Erase and Copy to test CD-RW
or DVD±RW erase and write. Use the arrow key to select Continuous
or the number of test cycles you want to run. Press the ENT button to
start the test, or ESC to go back to manual operation.
3. Select “Erase&Copy” to test erasing and rewriting to CD-RW or
DVD±RW discs only.
Burn-in
Test


ESCENT
12-06. Adv Setup
Burn-in


ESCENT
Set Burn-in num:
Run Continuous


ESCENT
Burn-in
Erase&Copy


ESCENT