User guide

www.aleratec.com
10
Using the DVD/CD Duplicator
Inserting Discs
Press the Eject button on the DVD/CD Recorder.1.
Place the disc in the tray. The printed (non-shiny) surface of the disc 2.
should be up.
To close the tray, press the Eject button or lightly push the front center 3.
of the tray.
Note:
Never place two discs in the tray at the same time.•
Do not touch the surface of the disc where it has been recorded.•
When using a 120 mm disc, please place it in the center of the tray •
where you are able to see the larger position specifically for the 120
mm disc.
When using a 80 mm disc or Business Card CD-R, please place it in •
the center of the tray where you can see the position for the 80 mm
disc.
Ejecting Discs
Disc copies will Auto Eject upon completion of a successful copy. Discs can
also be manually ejected from the drives.
Press the drive’s Eject button.1.
Carefully lift the disc from the tray.2.
To close the tray, press the Eject button or lightly push the front center 3.
of the tray.
Note:
After the tray has been ejected and the disc has been removed •
or placed onto the tray, make sure to close the tray to its original
position to avoid the accumulation of dust or miscellaneous items
inside the tray.
In case of emergency, insert the straightened end of a large paper •
clip or similar rigid object into the Emergency Eject Pinhole to open
the tray. Then gently pull the tray out.