User guide

www.aleratec.com
47
Using the DVD/CD Duplicator
12.13CD-TEXT(Notsupported)
12.14USBOption
This function lets you connect the Duplicator to a computer. Be sure that
your computer supports USB 2.0.
Note: When the USB option is OFF, “14. USB Mode” will be hidden; that
is, it won’t appear in the first layer of the function menu. Only “12. Adv
Setup” will appear. When the USB option is ON, the original “12. Adv
Setup” will change to “12.14 Adv Setup”.
There are two ways to enter USB Mode: Auto and Manual.
Auto:1. The Duplicator has auto link. It will enter “USB L. H Mode”
simply by connecting the USB cable to the USB port of the Duplicator
and the USB port of your computer. The display will appear as shown
at the left. When you are nished with USB Mode, simply disconnect
the USB cable from the computer, and the Duplicator will switch to
Stand Alone.
12-14. Adv Setup
USB Option


ESCENT
USB L. H Mode
D1: Mult D2: Mult


ESCENT