User guide
www.aleratec.com
48
Using the DVD/CD Duplicator
Main Menu
Advanced Setup
12.14USBOption
- continued
Manual:2. Press the DOWN Arrow to see the following display. Here
you can switch back to standalone mode (copy mode).
Press 3. ENT and the display will change to the following display. Press
the DOWN Arrow to switch to YES. Press ENT and the Duplicator
will switch back to the standalone duplicator mode (copy mode).
To go back to USB Mode, go to menu item “12.14 USB Mode” and 4.
press ENT. Press the DOWN Arrow to switch to YES.
Press 5. ENT and the display be as shown.
Now you are back in computer connect USB mode. From here, you can
return to the Auto Link mode. Make sure the USB cable is connecting
the Duplicator to your computer, and switch the Duplicator’s power
switch to OFF and then back to ON.
Copy Mode
ESCENT
Back to SA Mode
No
ESCENT
Switch USB Mode
No
ESCENT
USB L. H Mode
D1: Mult D2: Mult
ESCENT