User guide

www.aleratec.com

Using the DVD/CD Duplicator

Connect the USB 2.0 Data Cable to the Duplicator. ▪

Align and gently insert the USB 2.0 Data Cable into an available

USB 2.0 port on your computer, making sure you do not bend the

connector.

For P/N 260147 and 260148 and systems running Windows 98SE ▪

only: Install the USB 2.0 Drivers.

If you are running Windows 98SE: After your computer starts up,

insert the USB 2.0 Driver Software in your computer’s DVD/CD-

ROM drive, and run the driver install program to complete your

installation.

Note: This step is not needed if you are not running Windows 98SE.

Go to Adv Setup step 13 and switch to USB Mode. Your computer 2.

should recognize the DVD/CD-Recorder in the 1:2 DVD/CD Copy

Cruiser Pro HLX Win/Mac.

Install the software from the included CD.3.